End Yokes
Filters: STYLE = ISR, | PART NUMBER | SERIES | SPLINE COUNT | SPLINE DIA. | HUB DIA. | THRU HOLE | C/L TO END | STYLE | DIFF MODEL | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|
NOE-04-5695-A |
1000 | 15 | 1.026 | 1.630 | 0.000 | 2.500 | ISR | LD | Neapco | ||
| NOE-04-2181-A |
1000 | 21/22 | 0.984 | 1.430 | 1.570 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2135-A |
1000 | 22 | 0.984 | 1.500 | 0.380 | 2.105 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): .380-.400 PIN HOLE SIZE (in): .312-.318 Thru |
LD | Neapco | |
| NOE-04-2179-A |
1000 | 22 | 0.984 | 1.430 | 1.570 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2141-A |
1000 | 22 | 0.984 | 1.430 | 0.500 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2183-A |
1000 | 22 | 0.984 | 1.430 | 0.690 | 3.440 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.69 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2192-A |
1000 | 22 | 0.984 | 1.430 | 0.500 | 3.300 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2190-A |
1000 | 22 | 0.984 | 1.430 | 0.690 | 3.220 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.69 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2185-A |
1000 | 22 | 0.984 | 1.430 | 0.690 | 3.650 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.69 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2144-A |
1000 | 22 | 0.984 | 1.630 | 0.050 | 2.500 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .312-.318 Thru |
LD | Neapco | |
| NOE-04-2654-A |
1000 | 22 | 0.984 | 1.500 | 0.000 | 1.940 | ISR | LD | Neapco | ||
| NOE-04-3871-A |
1000 | 22 | 0.984 | 1.380 | 2.110 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): .38-.40 PIN HOLE SIZE (in): .314-.318 Thru |
LD | Neapco | ||
| NOE-04-3872-A |
1000 | 22 | 0.984 | 1.380 | 0.500 | 3.300 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .232-.238 |
LD | Neapco | |
| NOE-04-6032-A |
1000 | 22 | 0.984 | 1.500 | 1.500 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 |
LD | Neapco | |
| NOE-02-2125-A |
1000 | 22 | 0.984 | 1.300 | 3.000 | ISR | SPLINE YOKE W/FLANGE PILOT N/A BOLT CIRCLE 2.500 M8 x 1.25 THRU F-CL 2.400 |
LD | Neapco | ||
| NOE-02-2171-A |
1000 | 22 | 0.984 | 1.600 | 2.500 | ISR | SPLINE YOKE W/FLANGE PILOT 3.000 BOLT CIRCLE 3.375 5/16-18 F-CL 1.000 |
LD | Neapco | ||
| 1204-241 |
1251 | 22/24 | 0.995 | 1.342 | 1.300 | 2.900 | ISR | Used on 2 piece Subaru shafts to replace the center CV section, ujoint part # 1251-22 | LD | PTI | |
| 1204-261 |
1251 | 24/26 | 1.115 | 1.445 | 1.300 | 3.312 | ISR | Used on 2 piece Subaru shafts to replace the center CVJ, 1.73" inside ear to ear | LD | PTI | |
| 2304-261 |
2351 | 24/26 | 1.115 | 1.445 | 1.300 | 3.312 | ISR | Used on 2 piece Toyota shafts with 2351-20 Ujoint. Used with 1253-261 stub. 1.84" inside ear to ear | LD | PTI | |
| 2604-261 |
7260 | 24/26 | 1.100 | 1.450 | 1.300 | 3.250 | ISR | 0 | Seal hub partially machined, 2.12" between inside ears | LD | PTI |
| 2604-261M |
7260 | 24/26 | 1.100 | 1.450 | 1.300 | 3.250 | ISR | 0 | Seal hub machined all the way, 2.12" between inside ears | LD | PTI |
